Working Width:

SFM180-1800mm

SFM200-2000mm

SFM220-2200mm

Gearbox:                                                

SFM180-50hp

SFM200-65hp

SFM220-65hp

Category:

Category II

Suit for tractor Horsepower:

70-120hp/52-90KW

High-Grade steel for hood and side panel:

Tomorgo SFM series use Q345(European Standard:S355J2) grade steel for the 

whole hood and side panel, and the most materials used on the market is Q235.

Q235 is ordinary carbon steel, while Q345 is low-alloy structural steel, Q345-- good 

mechanical properties, low temperature performance can, good ductility and weldability, 

used as the low-pressure vessels, tanks, vehicles, cranes, mining machinery, structural, 

mechanical parts, building structures, metal structures in general, hot-rolled or normalizing 

state power plants, bridges, etc. to withstand dynamic load of use, can be used for all kinds of steel above -40 ℃ cold areas.

Overturn and side hydraulic offset :

Overturn feature can be used on mowing tree branches and road side or slops,

Side hydraulic offset can expand the mowing range, From the center of the PTO the mower 

extends 970cm to the left and 3730cm to the right(the biggest model).

Driven Belts:

4pcs Gates Belts 

Gates Corporation is a leading manufacturer of application-specific fluid power and power 

transmission solutions. In our previous testing process, the service life of the GATES belt is 

3 times that of the ordinary belt of the same specification. Belt is a wearing part, of course, 

the more durable the better, which can increase the performance of the product and reduce 

the trouble of replacement. All TOMORGO flail mower choose GATES belts.

Tomorgo always strives to be the best.

 Self-tensioner device:

Self-tensioner device can avoid slippage or overworking the belts, which will also greatly increase the belt life.

Chain Baffle:

Chain baffle is usually used for large flail mower, compare to the plate baffle, chain baffle design 

can relieve the pressure of too much debris deposited in the mower cabin during the operation.

Manual Rear Gate:

Manual Rear Gate can help you clear the grass debris or replace the blades very easily, when a mower 

without the rear gate, you need to lift the flail mower high enough to do this , which is inconvenient 

and unsafe, when you choose a flail mower, the rear gate is really important.

Double Hinge Prevent breakage:

10mm thickness double hinge to the open gate is really important, once breakage will cause 

big troubles to users, so tomorgo machine choose double strong hinge used on the mower.

Side strengthen plate to prevent tearing:

Lifting Hook:

Strong lifting hook will help you easily lift the machine after taken from the crate package , 

or you can move the mower by folklift to anywhere if necessary.

NM360 wear-resisting plate:

We use NM360 wear-resisting steel for the skate plate and thickness reach 6mm, increase the use life.

Rotor Shaft Diameter:

SFM180-140mm

SFM200-168mm

SFM220-168mm

Rear Roller Diameter:

SFM180-140mm

SFM200-168mm

SFM220-168mm

Blade Type:

Tomorgo FMH provide forged hammer blades  or  spring steel ,heat treated Y blades.

Hammer blades are used for clearing saplings and Y -blades are perfect for grasses.

Number of Blades:

SFM180: 16pcs hammer blades or 32+16 Y blades

SFM200: 18pcs hammer blades or 36+18  Y blades

SFM220: 20pcs hammer blades or 40+20 Y blades

Dynamic balanced rotor shaft:

Each flail mower cutter rotor with blades should be dynamic balanced, to ensure that 

the mower will not be unstable due to vibration during the actual working process, 

each Tomorgo flail mower rotor shaft unbalance weight is only allowed to be within 20g.

PTO Speed:

540 Only.

Rotor Shaft Speed:

2125 RPM

SKF Bearing:                                     

SFM flail mower rotor cutter adopts SKF bearings. 

SKF is the world's largest bearing manufacturer, and employs 44,000 people in 108 

manufacturing units. It has the largest industrial distributor network in the industry, 

with 17,000 distributor locations encompassing 130 countries. SKF is one of the largest 

companies in Sweden and among the largest public companies in the world.

Powered Coat Finish:

Tomorgo uses powder painting, the powder used has been tested for sun protection and 

environmental safety, and the adhesion is very good, can keep the machines in good look for many years.

Warranty and Service:

SFM series flail mower provide 2 years warranty period.

Our service department is staffed by professional technicians who inspect each machine before 

it is shipped. And when you need technical assistance, you can also write directly to support@tomorgo.com